Ceramic Fiber Moldable


 


Nutec Fibratec* Moldable is used to prevent heat loss caused by the deterioration of the existing lining and can be installed using a trowel, a caulking gun or a pump.


Nutec Fibratec* Moldable is multipurpose form of ceramic fiber dispersed in a sticky, cohesive binder system that adheres to most ceramic and metallic surfaces.

Features
  • Low thermal conductivity.
  • Low heat storage.
  • Reduces fume emission around refractory.
  • Excellent thermal shock resistance.
  • Resistance to gas velocity.
  • Easy to install.
  • Adheres to most ceramic and metallic surfaces.
  • Excellent corrosion resistance.
  • Inert to most chemicals.
  • Impermeable to molten aluminum, zinc, copper, lead.
  • Contains no asbestos.

Typical Applications
  • To form troughs or liners for non ferrous metal transfer.
  • Gaskets and seals around burner blocks.
  • Protection of metallic parts from heat.
  • Pump into voids in badly damaged back up insulation.
  • Gaskets and seals for chimneys and stacks.
  • Boiler doors seals and thermal insulation.
  • To fill voids and cracks in refractory surface.

Nutec Fibratec* Moldable is available in two forms.

Moldable Pump Mix, which is formulated with a proprietary alumina based binder system, ideal for molten aluminum contact applications or when pump or caulking tube application is desired.

Standard Moldable, with a conventional silica based binder system is normally specified for trowel or spatula applications.